DIY Bobbin Holder
1 small wood plaque
1 dowel, mine was 1/4″ round…just make sure it fits your bobbin!
drill with a bit to match the dowel thickness
small hand saw
wood glue
waxed paper
Martha Stewart acrylic craft paint
Drill 5-6 holes completely through your wood plaque. Just make sure you space them out enough so that you can place your bobbins on them!
Cut your dowel into 3.5″ increments with your handsaw, the number depending on how many holes you drilled. You may want to go higher or lower on the dowel length, so that number is totally personal. I wanted to be able to fit 3-4 bobbins on each dowel…make sure you take into account the thickness of your wood plaque before you start sawing!
Then place your plaque on waxed paper and add a drop or two of wood glue to each hole before placing the dowels in. The waxed paper will protect whatever surface you are working on from the glue plus it will not stick to the wood glue! Let dry for a about 30 minutes.
Once the glue is dry paint your new bobbin holder in any color your heart desires! I used Martha Stewarts Multi-Surface Acrylic Craft Paint in White Satin. You could also use spray paint. Since I hand-painted this I gave it two simple coats just to make sure I had nice even coverage.
Entwined Essentials says
Cute and a great idea, thanks for the tip!
Jessica at Me Sew Crazy says
Very clever Maggie!
TDT Designs says
Love it! Now you can go to the plumbing dept at Home Depot or Lowes and buy clear flexible pipe then cut circles the size of the inside of the bobbin and then a slit and it will fit over the bobbin so you dont have strings everywhere 🙂 if you need more info Im at teresasdt at gmail.com.
LuLu says
First I cut 6″ sections of the tubing>
Next, with a dark Sharpie, I mark my tubing in 1/8″ increments while at my cutting mat.
Sometime later, using paper scissors or Tonic (by TIm Holtz) scissors, I cut the 1/8″ pieces
I store in a small, clear , re-used covered food container. (good movie or TV task)
Grandma G says
Brilliant! I need one! And I was just about to give you the same suggestion that TDT Designs did. 🙂 Works great!
Sandi says
Thank you, thank you. What a super idea.
Sheleen Addison says
Very good idea, I am going to try a longer, narrower version to fit on my window ledge, thank you for the idea
Charity says
This is cute! I need something like this for all my bobbins. =)
diystylecindy says
LOVE this so much I wanted to share it with our DIYStyle.net FB audience 🙂 Thanks for the great organizing idea!!
Anonymous says
will your matching spool of thread fit also? so great when working with those projects that need thread changes!
Gingham Skies says
So tired of chasing runaway bobbins! This is brilliant!